PIM is not able to forward the register messages to anycast RP set peers due to non-availability of Source IP address. Register messages between the Anycast RP set peers are encapsulated with the configured unicast source and destination header.
Create loopback interface with routable unicast address configured on it. Enable PIM on the interface and then add unicast address in anycast RP set peer policy file. Refresh the policy file for the new entry to take effect. Verify that "show pim anycast-rp" command displays the newly configured local address
Warning
Register message cannot be forwarded to %anycastrp% anycastRP set peers since Source IP is not configured.
| Name | Type |
|---|---|
| anycastrp | IPaddrN |